|
A
complete kit for preparing porcelain veneers and inlays
and fractured porcelain teeth for bonding.
Porcelain
Prep Kit features Porcelain Etch Gel,
Dry-Rite drying agent and Silane bond enhancer: state-of-the-art accessory products for
enhanced bonding to porcelain surfaces using your preferred
composites and resin cements.
|
|
| Pulpdent
Porcelain Etch Gel, 9.6% hydrofluoric
acid, etches porcelain surfaces in two minutes and does
not stain composites or resin cements.
Dry-RiteTM
drying agent promotes complete chemical drying of etched
porcelain surfaces. The presence of moisture is a major
cause of failure in porcelain bonding procedures.
Silane
is placed on the dry porcelain surface to enhance bonding
values between the porcelain and the restorative composite
resin or resin cement.
|
|
Pulpdent Porcelain Etch Gel
9.6%
Hydrofluoric Acid
For etching porcelain veneers and inlays and fractured porcelain surfaces prior to bonding. This superior quality porcelain etch gel will not stain composites or resin cements. It is thixotropic, stays where placed, washes off easily, and etches porcelain in only 2 minutes.
|
|
|
Proper surface preparation enhances bonding values of
resins and resin cements to porcelain.
|
SEM
showing the porcelain surface BEFORE treatment
with Pulpdent Porcelain Etch
Gel. (Magnification 440X) |
 |
SEM
showing the porcelain surface AFTER a 2 minute
treatment with Pulpdent Porcelain
Etch Gel. Note the microscopic tags in the
porcelain surface. (Magnification 440X) |
|
|
Dry-Rite
Drying
Agent Contains Ethyl Alcohol with an Organic Solvent
For complete
chemical drying of dental surfaces before applying pit
and fissure sealants, silane, and in all clinical situations
where residual moisture may effect bonding and cementation.
Dry-Rite dispenses one drop at a time from syringe or
bottle. Dries immediately.
|
|
Silane Bond Enhancer
For
Bond Enhancement of Composites, Resin Cements and Other
Organic Resins to Porcelain
A single component material which enhances bonding values when applied to porcelain after etching with Porcelain Etch Gel and drying with Dry-Rite. Conveniently dispenses one drop at a time from the syringe.
|
|
