|
Directions
:
- Prepare
and cleanse canal in conventional manner.
- Select
needle that corresponds to size of last file used.
Remove white cap to expose needle hub.
- Self
thread needle fully onto syringe. Remove colored sheath
from needle.
- To
start flow, turn screw plunger slowly allowing time
for material to flow through needle. Turn plunger
counter-clockwise to stop flow.
- To
avoid overfill, insert needle directly into canal
at least 2mm short of the apex. Needle can be bent
for easy access. Do not crimp needle.
- Fill
canal completely by turning plunger while slowly withdrawing
needle.
- Seal
access opening with your preferred cement.
- TempCanal
is easily removed with file and irrigation.
Helpful
Hints:
- To
help prevent material from drying out, place a few
drops of water in the cap and recap syringe promptly
after each use.
- Before
attaching needle, clear luer lock tip of any dry particles.
- Only
use 18, 22, 25, and 27 gauge Pulpdent syringe needles.
- The
first needle attached forms the thread on the luer
tip.
- Turn
screw post slowly.
|
|
|
|
