| Indications:
Permanent cementation of crowns, bridges, inlays and orthodontic
brackets. A hard base under all types of fillings. Temporary
filling of deciduous teeth.
Measuring
Procedure: Since
the powder tends to settle, gently shake or invert the
bottle to fluff the powder. Level fill powder scoop.
The water dispenser bottle should be half filled with
distilled water and held vertically when dispensing
drops.
Mixing
Ratio:
- For
Cementation: 4 scoops powder + 4-5 drops water.
- For
Hard Base: 4 scoops powder + 3 drops water.
- Mixing
time: 15 seconds
- Working
Time: 2 minutes
- Remaining
time to Set: < 7 minutes
- Total
Time: 9 minutes at 37oC
Mixing
Instructions: Place
the powder in two separate heaps. Incorporate the first
heap of powder into the water. As soon as it is completely
wet, add the second heap and mix quickly to a smooth
creamy consistency ready for cementation, or to a putty
consistency for a hard base. Immediately apply the cement
to the clean, dry restoration, and seat it on the dry
prepared tooth. The excess cement can be trimmed away
cleanly at the rubbery stage just prior to final set.
Special
Notes:
* Mixing slab and spatula should be wiped clean with
a damp napkin just prior to setting.
* PolyCarb contains polyacrylic
acid. Avoid contact with eyes. In case of eye contact,
immediately rinse
copiously with water and seek medical
attention.
* Store in a dry place. Bottle should be tighly closed
immediately after each use.
|
