Products - OBA, Orthodontic Bracket Adhesive - Clinical Procedure

 


Fig. 1: After cleaning, apply Etch-Rite etching gel or semi-gel etchant to the tooth surfaces to be bracketed
Fig. 2: Rinse and dry, and apply a very thin coat of OBA Bonding Resin to the etched tooth surfaces


Fig. 3: Apply ½mm of OBA bracket adhesive paste on the bracket base and place on the tooth with firm pressure
Fig. 4: Remove excess bracket adhesive with an explorer or plastic instrument. The high viscosity paste is designed to prevent bracket drift

OBA - Fig 5&6
Fig. 5: Light cure for 10 seconds on each side of the bracket
Fig. 6: The bracket is now ready for placement of archwires